RS PRO Transparent Sealant Paste 310 ml Cartridge
Technical Document
Specifications
Brand
RS ProColour
Transparent
Sealant Type
Silicone Sealant
Application
Electrical
Package Size
310 ml
Package Type
Cartridge
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+180°C
Food Processing Safe
No
Chemical Type
Acetoxy, Elastomer
Physical Properties
Acetoxy Cure
Cure Time
7 (23 °C) days
Product Form
Paste
Tensile Strength
230N/cm
Operating Temperature Range
-60 → +180 °C
Hardness
25 Shore A
Odour
Acetic Acid
Specific Gravity
1.03
Dielectric Strength
21.6kV/mm
Country of Origin
Belgium
Product details
Mechanical Grade Paste
A clear acetoxy, silicone rubber compound equivalent to 732 RTV which will bond to most clean surfaces. It may be used as a sealant, gasket material or insulator for electrical repairs. Specific applications include sealing wire entries and connectors, adhesive for thermistor mounting, and seals for electrical housings and enclosures. During cure the material liberates acetic acid. Where a mould release agent is required, use PTFE dry film lubricant.
Stock information temporarily unavailable.
Please check again later.
EGP 2,315.67
Each (ex VAT)
1
EGP 2,315.67
Each (ex VAT)
1
Technical Document
Specifications
Brand
RS ProColour
Transparent
Sealant Type
Silicone Sealant
Application
Electrical
Package Size
310 ml
Package Type
Cartridge
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+180°C
Food Processing Safe
No
Chemical Type
Acetoxy, Elastomer
Physical Properties
Acetoxy Cure
Cure Time
7 (23 °C) days
Product Form
Paste
Tensile Strength
230N/cm
Operating Temperature Range
-60 → +180 °C
Hardness
25 Shore A
Odour
Acetic Acid
Specific Gravity
1.03
Dielectric Strength
21.6kV/mm
Country of Origin
Belgium
Product details
Mechanical Grade Paste
A clear acetoxy, silicone rubber compound equivalent to 732 RTV which will bond to most clean surfaces. It may be used as a sealant, gasket material or insulator for electrical repairs. Specific applications include sealing wire entries and connectors, adhesive for thermistor mounting, and seals for electrical housings and enclosures. During cure the material liberates acetic acid. Where a mould release agent is required, use PTFE dry film lubricant.