RS PRO Flame Retardant Calcium-Magnesium Silicate Thermal Insulating Sheet, 595mm x 495mm x 15mm
Technical Document
Specifications
Brand
RS ProMaterial
Calcium-Magnesium Silicate
Form
Sheet
Maximum Operating Temperature
+1150 (Continuous) °C, +1300 (Short Term) °C
Length
595mm
Width
495mm
Thickness
15mm
Density
350kg/m³
Flame Retardant
Yes
Thermal Shock Resistant
Yes
Thermal Conductivity
0.05 W/mK, 0.08 W/mK, 0.11 W/mK, 0.15 W/mK, 0.20 W/mK, 0.26 W/mKW/mK
Colour
Brown, White
Country of Origin
United Kingdom
Product details
Superwool 607 HT Board
A rigid panel made from a mixture of Superwool 607™ fibres, refractory fillers, organic and inorganic binders
Very low thermal conductivity
Can be easily cut and shaped with a hacksaw blade
Good thermal shock resistance allows use where large variations in temperature occur
Low heat storage capacity
Can be used in direct contact with flame
Immune to thermal shock
Continuous use to 1150 °C
Density 350 kg/m³
Please note there is a tolerance on the thickness of the material of +/- 15%
Stock information temporarily unavailable.
Please check again later.
EGP 7,185.72
Each (ex VAT)
1
EGP 7,185.72
Each (ex VAT)
1
Technical Document
Specifications
Brand
RS ProMaterial
Calcium-Magnesium Silicate
Form
Sheet
Maximum Operating Temperature
+1150 (Continuous) °C, +1300 (Short Term) °C
Length
595mm
Width
495mm
Thickness
15mm
Density
350kg/m³
Flame Retardant
Yes
Thermal Shock Resistant
Yes
Thermal Conductivity
0.05 W/mK, 0.08 W/mK, 0.11 W/mK, 0.15 W/mK, 0.20 W/mK, 0.26 W/mKW/mK
Colour
Brown, White
Country of Origin
United Kingdom
Product details
Superwool 607 HT Board
A rigid panel made from a mixture of Superwool 607™ fibres, refractory fillers, organic and inorganic binders
Very low thermal conductivity
Can be easily cut and shaped with a hacksaw blade
Good thermal shock resistance allows use where large variations in temperature occur
Low heat storage capacity
Can be used in direct contact with flame
Immune to thermal shock
Continuous use to 1150 °C
Density 350 kg/m³
Please note there is a tolerance on the thickness of the material of +/- 15%