KNITTER-SWITCH Push Button Bezel for Use with MPA Push Button Switches, MPE Push Button Switches, 51631

Knitter-Switch Miniature Push Button Switches - MPA & MPE Series

Knitter-Switch MPA and waterproof MPE series of miniature Push Button switches are available in a choice of SPDT or DPDT contact configurations with momentary or alternate switching functions and solder terminals.
Both the MPA and the IP67 waterproof MPE switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.
Accessories for the MPA and the waterproof MPE miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock number 134-2462.

• Momentary or alternate switching
• Waterproof IP67 rated - MPE series only
• Maximum switch rating of 6A at 125Vac, 3A at 250Vac
• Silver plated contacts
• M6 bush
• Solder terminals
• Contact resistance <10mΩ maximum
• Dielectric strength 1500Vac for 1 minute
• Insulation resistance 1000MΩ minimum
• Mechanical life >30,000 operations
• Operating temperature range -45 to +140°C

Notes

Actuator button is not supplied with the switch and must be ordered separately. For a suitable 15mm black button see stock number N/A
Momentary switches have the momentary state displayed in brackets, e.g. on - (on).

Supplied with

Mounting hardware.