Formlabs Finish Kit for use with Form 1+ High-Resolution 3D Printer

Formlabs Form 1+ Accessory Kit

Formlabs Form 1+ offers a professional stereo lithography 3D printer.

With a layer resolution of 25 μm the Formlabs Form 1+ SLA printer gives you quality 3D objects.
The Form 1+ SLA printer has been designed for anyone creating intricate 3D designs

The resin tank and build platform will need cleaning after every print to prolong their life spans and ensure the perfect print every time.
If you plan on printing frequently or changing resins often, we advise that you get multiple build platforms to allow you to immediately begin a print without having to clean it and stops you mixing resins.
The resin tank is a consumable item and should be replaced after approximately 2-3 litres of printing. (RS 894-7584)

Once you print had finished you will need to remove the build platform and use the scraper to remove the print from the build platform. The print is covered in sticky resin so be careful not to drip it on your workstation, you will then need to rinse the print 2-3 times in Isopropyl Alcohol until the resin has been washed away.
You will then have to cure your printed part with a UV light for 30 minutes to an hour. We just use the sun to cure our prints, but if you do most of your curing overnight you’ll need a UV Curing Chamber.

Ideal for prototyping, product design, jewellery, dental labs, model making

Formlabs Accessories