Atmel ZigBit USB Stick AT86RF233 RF Transceiver Development Kit for XMEGA 2.4GHz ATZB-X-233-USB
Technical Document
Specifications
Brand
AtmelRF Technology
RF Transceiver
Kit Classification
Development Kit
For Use With
XMEGA
Featured Device
AT86RF233
Frequency
2.4GHz
Kit Name
ZigBit USB Stick
Country of Origin
Malaysia
Product details
ZigBit 2.4GHz AT86RF233 XMEGA USB Stick
The Atmel ZigBit™ USB Stick ATZB-X-233-USB supports the AT86RF233 + ATxmega256A3U MCU wireless module. It is used to evaluate the module while plugged into a USB socket on a PC. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit ATZB-X0-256-3-0-C Module
USB connector
Jumper link for Bootloader enable
Header for JTAG programming
2 x User LEDs
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
Powered from USB connection
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
AtmelRF Technology
RF Transceiver
Kit Classification
Development Kit
For Use With
XMEGA
Featured Device
AT86RF233
Frequency
2.4GHz
Kit Name
ZigBit USB Stick
Country of Origin
Malaysia
Product details
ZigBit 2.4GHz AT86RF233 XMEGA USB Stick
The Atmel ZigBit™ USB Stick ATZB-X-233-USB supports the AT86RF233 + ATxmega256A3U MCU wireless module. It is used to evaluate the module while plugged into a USB socket on a PC. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit ATZB-X0-256-3-0-C Module
USB connector
Jumper link for Bootloader enable
Header for JTAG programming
2 x User LEDs
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
Powered from USB connection
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)