Technical Document
Specifications
Brand
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Maximum Output Voltage
20V
Number of Outputs
1
Power
400W
Minimum Supply Voltage
230V ac
Plug Type
IEC 320
Maximum Supply Voltage
230V ac
Output Type
Digital
Digital/Analogue
Digital
Minimum Operating Temperature
5°C
Supported Number of Displays
2
Maximum Operating Temperature
40°C
Standards/Approvals
No
Minimum Output Voltage
0V ac
Minimum Output Current
20A
Calibrated
UKAS
Country of Origin
United Kingdom
Product details
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)
Opto-isolated RS-232 interface
Front panel controls can be locked out
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.
Separate voltage and current meters for each output
Safety output terminals
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A
user manual and mains lead
EN61010-1 (Safety) and EN61326 (EMC)
Stock information temporarily unavailable.
EGP 79,212.00
EGP 79,212.00 Each (ex VAT)
Calibration type
UKAS Calibration
1
EGP 79,212.00
EGP 79,212.00 Each (ex VAT)
Stock information temporarily unavailable.
Calibration type
UKAS Calibration
1
Technical Document
Specifications
Brand
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Maximum Output Voltage
20V
Number of Outputs
1
Power
400W
Minimum Supply Voltage
230V ac
Plug Type
IEC 320
Maximum Supply Voltage
230V ac
Output Type
Digital
Digital/Analogue
Digital
Minimum Operating Temperature
5°C
Supported Number of Displays
2
Maximum Operating Temperature
40°C
Standards/Approvals
No
Minimum Output Voltage
0V ac
Minimum Output Current
20A
Calibrated
UKAS
Country of Origin
United Kingdom
Product details
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)
Opto-isolated RS-232 interface
Front panel controls can be locked out
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.
Separate voltage and current meters for each output
Safety output terminals
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A
user manual and mains lead
EN61010-1 (Safety) and EN61326 (EMC)