Parker Hydraulic End Sleeve TXS12

RS Stock No.: 302-8196Brand: ParkerManufacturers Part No.: TXS12
brand-logo
View all in Hydraulic Fittings

Technical Document

Specifications

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Sleeve

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Product details

End Sleeve

Suitable for use with complete range of Triple-Lok flared tube fittings and hydraulic tube

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

EGP 89.25

Each (In a Pack of 10) (ex VAT)

Parker Hydraulic End Sleeve TXS12

10

Available in multiples of 10
10EGP 892.50
20EGP 1,785.00
30EGP 2,677.50
40EGP 3,570.00
50EGP 4,462.50
60EGP 5,355.00
70EGP 6,247.50
80EGP 7,140.00
90EGP 8,032.50
100EGP 8,925.00
110EGP 9,817.50
120EGP 10,710.00
130EGP 11,602.50
140EGP 12,495.00
150EGP 13,387.50

EGP 89.25

Each (In a Pack of 10) (ex VAT)

Parker Hydraulic End Sleeve TXS12
Stock information temporarily unavailable.

10

Available in multiples of 10
10EGP 892.50
20EGP 1,785.00
30EGP 2,677.50
40EGP 3,570.00
50EGP 4,462.50
60EGP 5,355.00
70EGP 6,247.50
80EGP 7,140.00
90EGP 8,032.50
100EGP 8,925.00
110EGP 9,817.50
120EGP 10,710.00
130EGP 11,602.50
140EGP 12,495.00
150EGP 13,387.50

Technical Document

Specifications

Brand

Parker

Hydraulic Fitting Type

Hydraulic End Sleeve

Material

Steel

Finish

Zinc Plated

Maximum Operating Pressure

350bar

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+120°C

Product details

End Sleeve

Suitable for use with complete range of Triple-Lok flared tube fittings and hydraulic tube

Flared Tube Fittings

Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for low and medium pressure applications up to 350 bar nominal pressure and have an operating temperature range of -40°C to +120°C. Their design is simple. The flaring tool vice and flaring pins (available separately) create a seal and hold fluid under pressure in the system. The tube end is flared to 37° and clamped between the fitting nose and the sleeve when the nut is tightened. This provides an effective single seal point between fitting nose and tube flare. The Parker Triple-Lok fitting consists of three components: fitting body; tube nut; sleeve. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used.