Technical Document
Specifications
DC Holdover Voltage
135V
Minimum Operating Temperature
-55°C
DC Spark Over Voltage
350V
Maximum Operating Temperature
+105°C
Maximum Surge Current
10A
Impulse Spark Over Voltage
875V
Mounting Type
Surface Mount
Suppressor Type
2 Electrode Gas Discharge Tube
Capacitance
1pF
Length
7.9mm
Depth
6mm
Height
7.5mm
Brand
BournsDimensions
7.9 x 6 x 7.5mm
Series
2029
Country of Origin
Costa Rica
Product details
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.
Stock information temporarily unavailable.
Please check again later.
EGP 70.44
Each (On a Reel of 500) (ex VAT)
500
EGP 70.44
Each (On a Reel of 500) (ex VAT)
500
Technical Document
Specifications
DC Holdover Voltage
135V
Minimum Operating Temperature
-55°C
DC Spark Over Voltage
350V
Maximum Operating Temperature
+105°C
Maximum Surge Current
10A
Impulse Spark Over Voltage
875V
Mounting Type
Surface Mount
Suppressor Type
2 Electrode Gas Discharge Tube
Capacitance
1pF
Length
7.9mm
Depth
6mm
Height
7.5mm
Brand
BournsDimensions
7.9 x 6 x 7.5mm
Series
2029
Country of Origin
Costa Rica
Product details
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.