Microchip, 16 bit PIC, PIC24FJ Microcontroller, 32 MHz, 1MB FLASH, 100-Pin TQFP

PIC24FJxxxGA610/GB610 16-Bit Microcontrollers

The Microchip PIC24FJxxxGA610/GB610 family of Microcontrollers are peripheral rich 16-bit devices that lend themselves to applications that require a large amount of memory.
Of particular note is the Dual Partition Flash with Live Update Capability that allows the MCU to hold two independent software applications (including boot loader). Furthermore this functionality allows the simultaneous programming of one partition while executing application code from the other.

Microcontroller Features

• Modified Harvard Architecture
• Up to 16 MIPS Operation @ 32 MHz
• 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
• 32-Bit by 16-Bit Hardware Divider
• 16 x 16-Bit Working Register Array
• In-Circuit Serial Programming (ICSP)
• In-Circuit Emulation (ICE)
• Peripheral Pin Select (PPS)
• Power-on Reset (POR) and Brown-out Reset (BOR)
• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable High/Low-Voltage Detect (HLVD)
• Flexible Watchdog Timer (WDT)

Dual Partition Flash Features

• Capable of Holding Two Independent Software Applications, Including Boot Loader
• Permits Simultaneous Programming of One Partition while Executing Application Code from the Other
• Allows Run-Time Switching Between Active Partitions

eXtreme Low-Power (XLP) Features

• Sleep and Idle modes to Selectively Shut-Down Peripherals and/or Core
• Doze mode to allow the CPU to Run at a Lower Clock Speed than Peripherals
• Alternate Clock Modes for On-the-Fly Switching to Lower Clock Speeds
• Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation

Peripheral Features

• 10/12-Bit 200/500 ksps Analogue-to-Digital Converter (ADC) Converter – 24 Channels
• Three Enhanced Analogue Comparators
• Charge Time Measurement Unit (CTMU) for Capacitive Touch Sensing
• Up to Five External Interrupt Sources
• Peripheral Pin Select (PPS)
• Eight-Channel Direct Memory Access (DMA)
• Five 16-Bit Timers/Counters with Prescalers - Can be paired as 32-bit timers/counters
• Six Input Capture modules, each with a Dedicated 16-Bit Timer
• Six Output Compare/PWM modules, each with a Dedicated 16-Bit Timer
• Four Single Output CCPs (SCCP) and Three Multiple Output CCPs (MCCP) Modules
• Enhanced Parallel Master/Slave Port (EPMP/EPSP)
• Hardware Real-Time Clock/Calendar (RTCC)
• USB v2.0 On-The-Go (OTG) Compliant Module – PIC24xxxGB610 models only
• Three 3-Wire/4-Wire SPI modules
• Three I2C Modules
• Six UART Modules
• Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
• Four Configurable Logic Cells (CLCs)

PIC24 Microcontrollers