Geckodrive Stepper Motor Controller, 7 A, 80 V dc

G201X - Step Motor Drive

The G201X is a stepper motor drive with an aluminium case. Drives stepper motors up to 7 Amps.

STEP and DIRECTION inputs are +3.3/5 VDC compatible
Recirculate mode during STANDBY greatly reduces motor heating while stopped
Power-on RESET
Direction is clocked in on the active step pulse edge
DIP switch settings for current and motor version
Needs heatsinking for current settings greater than 3 amps
Low motor heating while stopped
Power supply voltage between 18 and 80 VDC
Aluminium cover and plate
Connector type is Modular, 5mm pitch