Technical Document
Specifications
Number of ADCs
1
Maximum Operating Temperature
70 °C
Digital Interface Type
Parallel
Architecture
Semi Flash
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Pin Count
20
Resolution
8-bit
Input Signal Type
Single Ended
Input Type
Voltage
Sampling Rate
667ksps
Typical Single Supply Voltage
5 V
Package Type
SOIC W
Brand
Texas InstrumentsDimensions
12.8 x 7.47 x 2.34mm
Product details
MIN lighting timers
Modular lighting timers (up to 3600 W for incandescent and halogen lighting); A contact closes and then opens based on a time that can be adjusted from 30 seconds → 20 minutes; Adjustment by potentiometer.
MINs
Automatic operation: lighting timer (any new action restarts the timer).
Override: permanently on.
MINp and MINt
Warning of lighting switching off by light source flashing at the end of the time-delay.
Two automatic operating modes (timer with or without pre-warning), and override.
Two command sequences may be received per pushbutton:
control pulse < 2 seconds. : Starts the adjustable time-delay (during this period, another pulse < 2 seconds. restarts the time-delay (MINp) or switches off the lighting (MINt).
control pulse > 2 seconds. : Starts the fixed time-delay for 1 hour. during this period, another pulse < 2 seconds. restarts the time-delay for 1 hour. and another pulse > 2 seconds. switches off the lighting.
Staircase
Stock information temporarily unavailable.
Please check again later.
EGP 447.84
Each (In a Tube of 36) (ex VAT)
36
EGP 447.84
Each (In a Tube of 36) (ex VAT)
36
Technical Document
Specifications
Number of ADCs
1
Maximum Operating Temperature
70 °C
Digital Interface Type
Parallel
Architecture
Semi Flash
Minimum Operating Temperature
0 °C
Mounting Type
Surface Mount
Pin Count
20
Resolution
8-bit
Input Signal Type
Single Ended
Input Type
Voltage
Sampling Rate
667ksps
Typical Single Supply Voltage
5 V
Package Type
SOIC W
Brand
Texas InstrumentsDimensions
12.8 x 7.47 x 2.34mm
Product details
MIN lighting timers
Modular lighting timers (up to 3600 W for incandescent and halogen lighting); A contact closes and then opens based on a time that can be adjusted from 30 seconds → 20 minutes; Adjustment by potentiometer.
MINs
Automatic operation: lighting timer (any new action restarts the timer).
Override: permanently on.
MINp and MINt
Warning of lighting switching off by light source flashing at the end of the time-delay.
Two automatic operating modes (timer with or without pre-warning), and override.
Two command sequences may be received per pushbutton:
control pulse < 2 seconds. : Starts the adjustable time-delay (during this period, another pulse < 2 seconds. restarts the time-delay (MINp) or switches off the lighting (MINt).
control pulse > 2 seconds. : Starts the fixed time-delay for 1 hour. during this period, another pulse < 2 seconds. restarts the time-delay for 1 hour. and another pulse > 2 seconds. switches off the lighting.