RF Solutions ZETAPLUS-868-D Module 868MHz, 1.8 → 3.6V
Technical Document
Specifications
Brand
RF SolutionsComponent Type
Module
Supported Frequency Bands
868MHz
Modulation Technique
FM
Maximum RF Data Rate
500kbit/s
Maximum Output Power
+13dBm
Receiver Sensitivity
-116dBm
Supported Bus Interfaces
Serial
Supply Voltage
1.8 → 3.6V
Dimensions
16 x 16.5 x 1mm
Height
1mm
Length
16.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
16mm
Product details
ZETAPLUS Miniature Smart RF Transceiver Module
The ZETAPLUS Smart module is a Radio Transceiver with SPI (Serial Peripheral Interface) and UART interface. A highly tuned RF matching network achieves range of 2 kilometres. It features a 64-byte transmit/receive FIFO and has low current consumption for the power output. The ZETAPLUS integrates a battery voltage detector with an 11-bit ADC.
Simple UART and SPI interface
Transmit Power +13 dBm
High Sensitivity -116 dBm @ 2.4 kbps
Data Rate maximum 500 kbps
Low Power with 10 mA Rx, 18 mA Tx, 0.5 nA Standby
Operating Voltage 1.8 V to 3.6 V
Based on Silicon Labs Si4455 Transceiver
No configuration required
No external components
Dimensions 16 x 18 mm
Wireless Modules - RF Solutions
Stock information temporarily unavailable.
Please check again later.
EGP 2,007.59
Each (ex VAT)
1
EGP 2,007.59
Each (ex VAT)
1
Technical Document
Specifications
Brand
RF SolutionsComponent Type
Module
Supported Frequency Bands
868MHz
Modulation Technique
FM
Maximum RF Data Rate
500kbit/s
Maximum Output Power
+13dBm
Receiver Sensitivity
-116dBm
Supported Bus Interfaces
Serial
Supply Voltage
1.8 → 3.6V
Dimensions
16 x 16.5 x 1mm
Height
1mm
Length
16.5mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
16mm
Product details
ZETAPLUS Miniature Smart RF Transceiver Module
The ZETAPLUS Smart module is a Radio Transceiver with SPI (Serial Peripheral Interface) and UART interface. A highly tuned RF matching network achieves range of 2 kilometres. It features a 64-byte transmit/receive FIFO and has low current consumption for the power output. The ZETAPLUS integrates a battery voltage detector with an 11-bit ADC.
Simple UART and SPI interface
Transmit Power +13 dBm
High Sensitivity -116 dBm @ 2.4 kbps
Data Rate maximum 500 kbps
Low Power with 10 mA Rx, 18 mA Tx, 0.5 nA Standby
Operating Voltage 1.8 V to 3.6 V
Based on Silicon Labs Si4455 Transceiver
No configuration required
No external components
Dimensions 16 x 18 mm