Technical Document
Specifications
Brand
Eccel Technology LtdComponent Type
Reader
Supported Bus Interfaces
RS232
Supply Voltage
5V
Length
75mm
Width
50mm
Country of Origin
United Kingdom
Product details
OEM-MICODE RFID Reader Boards
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Features:
Complete plug-and-go RFID Read / Write system
Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol
RFID - Eccel
Stock information temporarily unavailable.
Please check again later.
EGP 6,097.81
Each (ex VAT)
1
EGP 6,097.81
Each (ex VAT)
1
Technical Document
Specifications
Brand
Eccel Technology LtdComponent Type
Reader
Supported Bus Interfaces
RS232
Supply Voltage
5V
Length
75mm
Width
50mm
Country of Origin
United Kingdom
Product details
OEM-MICODE RFID Reader Boards
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Features:
Complete plug-and-go RFID Read / Write system
Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol